MAHAVIR STEEL
INDUSTRIES LTD.

Products
MS Flat Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Flat Bars. MS Flat Bars are used by Grating manufactures, cable trays, bright bar industries, automobile and auto-ancillaries, Truck trailers, Tippers, Railways, bus body, elevators and escalators, Scaffolding manufacturers, Base plates, Earthing material, Ship building, washers, flanges,clamps and many more engineering industries.

MS Flats : Width 25 to 300 mm. & Thickness 5 to 50 mm.
Size in mm Average Weight
KG/MTR KG/FT
20 x 4 0.79 0.24
20 x 5 0.79 0.24
21 x 6 1.00 0.30
25 x 5 0.98 0.30
25 x 6 1.18 0.40
25 x 8 1.57 0.50
25 x 10 1.9 0.60
25 x 12 2.36 0.70
28 x 6 1.30 0.40
30 x 5 1.18 0.40
30 x 6 1.40 0.40
32 x 5 1.26 0.40
32 x 6 1.50 0.50
32 x 8 2.00 0.60
32 x 10 2.50 0.80
32 x 12 3.00 0.90
38 x 3 0.90 0.30
38 x 5 1.50 0.50
38 x 12 3.60 1.10
40 x 5 1.57 0.50
40 x 6 1.90 0.60
40 x 8 2.50 0.80
40 x 10 3.10 1.00
40 x 12 3.77 1.20
40 x 16 5.00 1.50
40 x 20 6.30 1.90
40 x 25 7.85 2.40
45 x 12 4.20 1.30
50 x 4 1.57 2.00
50 x 5 1.96 0.60
50 x 6 2.36 0.70
50 x 8 3.14 1.00
50 x 10 3.90 1.20
50 x 12 4.7 1.40
50 x 16 6.28 1.90
50 x 20 7.85 2.40
50 x 25 9.80 3.00
50 x 32 12.56 3.83
63 x 6 3.00 0.90
65 x 6 3.06 0.93
65 x 8 4.08 1.20
65 x 10 5.10 1.60
65 x 12 6.10 1.90
65 x 16 8.16 2.50
65 x 20 10.20 3.10
65 x 25 12.80 3.9
65 x 32 16.33 4.98
65 x 40 20.41 6.22
65 x 50 25.51 7.78
75 x 6 3.53 1.10
75 x 8 4.71 1.40
75 x 10 5.89 1.80
75 x 12 7.07 2.10
75 x 16 9.42 2.90
75 x 20 11.80 3.60
75 x 25 14.70 4.50
75 x 32 18.90 4.50
75 x 40 23.60 7.20
75 x 50 29.44 8.97
100 x 6 4.71 1.40
100 x 8 6.28 1.90
100 x 10 7.85 2.40
100 x 12 9.42 2.90
100 x 16 12.56 3.80
100 x 20 15.70 4.80
100 x 25 19.60 6.00
100 x 32 25.12 7.66
100 x 40 31.40 9.57
100 x 50 39.25 11.96
125 x 6 5.90 1.80
125 x 8 7.90 2.40
125 x 10 9.80 3.00
125 x 12 11.80 3.60
125 x 16 15.70 4.80
125 x 20 19.60 6.00
125 x 25 24.50 7.50
125 x 32 31.40 9.57
125 x 40 39.25 11.96
130 x 12 12.25 3.73
150 x 6 7.07 2.20
150 x 8 9.42 2.90
150 x 10 11.80 3.60
150 x 12 14.10 4.30
150 x 16 18.80 5.70
150 x 20 23.60 7.20
150 x 25 29.40 8.90
150 x 32 37.68 11.48
150 x 40 47.10 14.36
178 X 6 8.38 2.56
178 X 8 11.18 3.41
200 x 6 9.40 2.90
200 x 8 12.56 3.80
200 x 10 15.70 4.80
200 x 12 18.80 5.70
200 x 16 25.10 7.70
200 x 20 31.40 9.60
200 x 25 39.20 12.00
250 x 6 11.80 3.60
250 x 8 15.70 4.80
250 x 10 19.60 6.00
250 x 12 23.60 7.20
250 x 16 31.40 9.60
250 x 20 39.20 12.00
250 x 25 49.10 15.00
300 x 6 14.10 4.30
300 x 8 18.80 5.80
300 x 10 23.55 7.20
300 x 12 28.30 8.60
300 x 16 37.70 11.50
Rolling Tolerances
Width
Thickness
Sectional weight
Length
up to 50 mm: ± 1 mm
50 mm to 75 mm: ± 1.5 mm
75 mm to 100 mm: ± 2 mm
100 mm and above ± 2%
and maximum not exceding 6 mm
up to 12 mm: ± 0.5 mm
over 12 mm: 4% and max not exceeding 1.5 mm
Up to 3 mm thick: +5/-3%
Over 3 mm : ± 5%
For fixed length : ± 100 mm

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.