Steel Flats Manufacturer, MS Flats, Supplies of Mild Steel (MS) Flat Bars.

"Instilling confidence in Steel"

MS Flat Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Flat Bars. MS Flat Bars are used by Grating manufactures, cable trays, bright bar industries, automobile and auto-ancillaries, Truck trailers, Tippers, Railways, bus body, elevators and escalators, Scaffolding manufacturers, Base plates, Earthing material, Ship building, washers, flanges,clamps and many more engineering industries.

MS Flats : Width 25 to 300 mm. & Thickness 5 to 50 mm.

Size in mm	Average Weight
Size in mm	KG/MTR	KG/FT
20 x 4	0.79	0.24
20 x 5	0.79	0.24
21 x 6	1.00	0.30
25 x 3	0.59	0.19
25 x 4	0.79	0.24
25 x 5	0.98	0.30
25 x 6	1.18	0.40
25 x 8	1.57	0.50
25 x 10	1.9	0.6
25 x 12	2.36	0.70
28 x 6	1.30	0.40
30 x 3	0.71	0.22
30 x 4.7	1.11	0.34
30 x 5	1.18	0.40
30 x 60	1.40	0.40
32 x 5	1.26	0.40
32 x 6	1.50	0.50
32 x 8	2	0.60
32 x 10	2.50	0.80
32 x 12	3	0.90
38 x 3	0.90	0.30
38 x 5	1.50	0.50
38 x 12	3.60	1.10
40 x 4	1.26	0.38
40 x 5	1.57	0.50
40 x 6	1.90	0.60
40 x 8	2.50	0.80
40 x 10	3.10	1.00
40 x 12	3.77	1.20
40 x 16	5.00	1.50
40 x 20	6.30	1.90
40 x 25	7.85	2.40
45 x 12	4.20	1.30
45 x 20	7.07	2.15
50 x 4	1.57	2.00
50 x 5	1.96	0.60
50 x 6	2.36	0.70
50 x 8	3.14	1.00
50 x 10	3.90	1.20
50 x 12	4.7	1.40
50 x 16	6.28	1.90
50 x 20	7.85	2.40
50 x 25	9.80	3.00
50 x 32	12.56	3.83
60 x 6	2.83	0.87
63 x 6	3	0.9
65 x 5	2.55	0.78
65 x 6	3.06	0.93
65 x 8	4.08	1.2
65 x 10	5.1	1.6
65 x 12	6.10	1.90
65 x 16	8.16	2.5
65 x 20	10.2	3.1
65 x 25	12.8	3.9
65 x 32	16.33	4.98
65 x 40	20.41	6.22
65 x 50	25.51	7.78
75 x 5	5.7	1.7
75 x 6	3.53	1.10
75 x 8	4.71	1.4
75 x 10	5.89	1.8
75 x 12	7.70	2.10
75 x 16	9.42	2.90
75 x 20	11.8	3.6
75 x 25	14.7	4.5
75 x 32	18.9	4.5
75 x 40	23.6	7.2
75 x 50	29.44	8.97
80 x 8	5.02	1.53
80 x 10	6.28	1.97
100 x 5	3.93	1.2
100 x 6	4.71	1.4
100 x 8	6.28	1.9
100 x 10	7.85	2.4
100 x 12	9.42	2.90
100 x 16	12.56	3.8
100 x 20	15.70	4.80
100 x 25	19.60	6.00
100 x 30	23.55	7.18
100 x 32	25.12	7.66
100 x 40	31.40	9.57
100 x 50	39.25	11.96
125 x 6	5.90	1.80
125 x 8	7.90	2.40
125 x 10	9.80	3.00
125 x 12	11.80	3.60
125 x 16	15.70	4.80
125 x 20	19.60	6.00
125 x 25	24.50	7.50
125 x 32	31.40	9.57
125 x 40	39.25	11.96
130 x 12	12.25	3.73
150 x 6	7.07	2.20
150 x 8	9.42	2.90
150 x 10	11.80	3.60
150 x 12	14.10	4.30
150 x 16	18.80	5.70
150 x 20	23.60	7.20
150 x 25	29.40	8.90
150 x 32	37.68	11.48
150 x 40	47.10	14.36
160 x 30	37.68	11.94
178 X 6	8.38	2.56
178 X 8	11.18	3.41
180 X 12	16.96	5.17
180 X 20	28.26	8.62
200 x 6	9.40	2.90
200 x 8	12.56	3.80
200 x 10	15.70	4.80
200 x 12	18.80	5.70
200 x 16	25.10	7.70
200 x 20	31.40	9.60
200 x 25	39.20	12
250 x 6	11.80	3.60
250 x 8	15.70	4.80
250 x 10	19.60	6.00
250 x 12	23.60	7.20
250 x 16	31.40	9.60
250 x 20	39.20	12.00
250 x 25	49.10	15.00
300 x 6	14.10	4.30
300 x 8	18.80	5.80
300 x 10	23.55	7.20
300 x 12	28.30	8.60
300 x 16	37.70	11.50

Rolling Tolerances

Width	Thickness	Sectional weight	Length
up to 50 mm: ± 1 mm 50 mm to 75 mm: ± 1.5 mm 75 mm to 100 mm: ± 2 mm 100 mm and above ± 2% and maximum not exceding 6 mm	up to 12 mm: ± 0.5 mm over 12 mm: 4% and max not exceeding 1.5 mm	Up to 3 mm thick: +5/-3% Over 3 mm : ± 5%	For fixed length : ± 100 mm

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

MAHAVIR STEEL INDUSTRIES develops specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.

Find our CE Label & Declaration of Performance here.

Any Queries: [email protected]

MS Flat Bars

MS Flat Bars

MS Flats : Width 25 to 300 mm. & Thickness 5 to 50 mm.

Get Touch With Us